-
Supplemental data for the paper: Stretching the limits of dynamic and quasi-static flow testing on cohesive limestone powders
Hao Shi; G. (Geoffroy) Lumay; S. (Stefan) Luding; (2020)
This is the meta data as well as the raw experimental data for the paper: "Stretching the limits of dynamic and quasi-static flow testing on limestone powders" that published in... -
Supplementary data for the master thesis: 3D printed bio-inspired adhesives, friction force generation by modulating stiffness.
Frank Haring; (2020)
Supplementary data: for 3D printed bio-inspired adhesives, friction force generation by modulating stiffness. Containing the recorded data from the performed tests, the Matlab... -
Data for XS grant - Innovative single-step approach to printable and flexible diamond sensors
Simona Baluchová; (2024)
The data in this dataset were obtained during the execution (1 year) of the grant project focused on “Innovative single-step approach to printable and flexible diamond sensors”.... -
Research data supporting the article "Polishing of metal 3D printed parts with complex geometry: Visualizing the influence on geometrical features using centrifugal disk finishing"
Kirsten Lussenburg; Remi I. B. van Starkenburg; Paul Breedveld; (2023)
Parts produced with metal additive manufacturing often suffer from a poor surface finish. Surface finishing techniques are effective to improve the quality of 3D printed... -
Data presented in the paper "Circular Microstructural Volume Elements for Strain Localization Problems"
Pieter Hofman; Frans van der Meer; Lu Ke; (2022)
LaTeX files with the data that is used to make the plots in the paper.
