Data underlying the PhD dissertation: Circular use of concrete fractions - Unlocking the potential of residual cementitious fines recovered from End-of-Life concrete: From pre-demolition characterization to high-value clinker replacement

Alberda van Ekenstein, A.T.M.

2026

The production of concrete is responsible for roughly 8% of global CO₂ emissions, a burden driven primarily by the clinker used in Portland cement. Existing concrete recycling practices, however, mainly target the recovery of aggregates, while the cementitious component is discarded as a...

Wave overtopping at rubble mound breakwaters with a non-reshaping berm

Krom, J.C. [Jan Kees]

2013

Wave overtopping was investigated by means of a physical model. The breakwater scale model was divided into 8 collection bins. Overtopped volumes were collected and pumped into floating tanks further down the flume. After the experiment the mass of the floating tanks was measured and the mean...

Rheological data underlying the Chapter 4 and 6 of the thesis: Interactions of moisture and oxidative ageing mechanisms in paving binders: towards improving durability of pavements

Ma, Lili

2023

Rheological measurements (including frequency sweep, LAS fatigue tests, relaxation tests, and viscosity determined by DSR and Viscometer) of bituminous binders at different ageing states, various moisture conditions, and field conditions. For details, please see README.txt file.

Data presented in the paper "Unifying creep and fatigue modeling of composites: a time-homogenized micromechanical framework with viscoplasticity and cohesive damage".

Kovačević, Dragan | Hofman, Pieter | Barcelos Carneiro M Da R, Iuri | Van Der Meer, Frans

2024

Tex files containing data used for diagrams in the paper, plus pdf figures related to the model formulation, and svg figures from which pdf figures have been generated.

Data supporting the publication: A Novel Tire-Pavement Related Parameter for Improved Rolling Resistance Predictions

Wagasing Arachchige, Saranga | Kasbergen, Cor | Anupam, Kumar | Moenielal, Mahesh | Wensveen, Thijs | Erkens, Sandra

2026

This dataset supports the study “A Novel Tire-Pavement Related Parameter for Improved Rolling Resistance Predictions” and contains field measurements, processed surface texture data, and derived parameters used to investigate rolling resistance (RR) of asphalt pavements. The dataset combines...

Data underlying the publication: Interrogation of oxidative pulsed methods for the stabilization of copper electrodes for CO2 electrolysis

Kok, Jesse | Burdyny, Thomas

2024

Data sets containing the data points used for creating figures in both the manuscript and supporting information. Raw Data sets taken from gas chromatography, potentiostat and in situ Raman spectroscopy setup.The gas chromatography data is converted into faradaic efficiencies (FE) as a function...

Research data on Verification of Unified Yield Surface SFG Model Considering Temperature Influence

LIU, Xiaowen | WU, Zeming | luo, hailin

2023

In landfill foundation treatment, high-level radioactive waste disposal, geothermal resources development and utilization and other engineering construction practice, there is a large amount of unsaturated soil. When unsaturated soil is affected by sunlight, geothermal, nuclear waste,...

Supporting data for: "Active and Passive Monitoring of Fault Reactivation under Stress Cycling"

Veltmeijer, Aukje | Naderloo, Milad

2024

Increased seismicity, due to subsurface activities has led to increased interest in monitoring and seismic risk mitigation. In this study we combined passive and active acoustic monitoring methods to monitor fault sliding and reactivation in the laboratory. Acoustic emission (AE) and ultrasonic...

Supporting data for "Early detection of stress changes and failure using acoustic measurements - Chapter 3 Precursory signals to the onset of laboratory stress-driven fault slip through acoustic monitoring"

Veltmeijer, Aukje

2024

Ultrasonic monitoring of cyclic stress-driven fault reactivation experiments in the rock deformation laboratory. Includes the waveforms and loading data (force, displacement, pore pressure)

Data for XS grant - Innovative single-step approach to printable and flexible diamond sensors

Baluchová, Simona

2024

The data in this dataset were obtained during the execution (1 year) of the grant project focused on “Innovative single-step approach to printable and flexible diamond sensors”. Dataset comprises raw data and/or exported files (in order to process them in a suitable software such as Excel or...